OP07C: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Input Offset Voltage	V_IO	-	30	150	μV	@ 25°C, V_S = ±15V
Input Bias Current	I_B	-	45	125	nA	@ 25°C, V_S = ±15V
Input Offset Current	I_IO	-	4.5	12.5	nA	@ 25°C, V_S = ±15V
Open Loop Gain	A_VOL	250	1000	-	dB	@ 25°C, V_S = ±15V
Slew Rate	SR	-	0.3	0.6	V/μs	@ 25°C, V_S = ±15V
Bandwidth	f_T	-	12	15	Hz	@ 25°C, V_S = ±15V
Output Voltage Swing	V_OUT	-13	-13.5	-14	V	@ 25°C, V_S = ±15V
Supply Current	I_S	-	1.9	2.4	mA	@ 25°C, V_S = ±15V
Common-Mode Rejection Ratio	CMRR	90	110	130	dB	@ 25°C, V_S = ±15V
Power Supply Rejection Ratio	PSRR	80	100	120	dB	@ 25°C, V_S = ±15V

Power Supply:
- The OP07C can operate with a dual power supply ranging from ±2V to ±18V.
- Ensure that the power supply is stable and free from noise to avoid affecting the performance of the op-amp.
Input Configuration:
- Connect the non-inverting input (pin 3) and inverting input (pin 2) as required by your circuit.
- Use high-quality resistors for feedback and input biasing to maintain accuracy.
Output Configuration:
- The output (pin 6) can swing within 1V of the supply rails.
- Ensure that the load connected to the output does not exceed the maximum current rating of the op-amp.
Grounding:
- Connect the ground pin (pin 4) to the system ground.
- Proper grounding is crucial to minimize noise and ensure stable operation.
Capacitors:
- Use bypass capacitors (typically 0.1 μF and 10 μF) between the power supply pins and ground to filter out any noise.
Temperature Considerations:
- The OP07C is designed to operate within a temperature range of -40°C to +85°C.
- Ensure that the operating environment does not exceed these limits to avoid damage or reduced performance.
Stability:
- The OP07C is internally compensated for unity gain stability.
- For higher gain applications, additional compensation may be necessary to maintain stability.
Storage and Handling:
- Store the OP07C in a dry environment to prevent moisture damage.
- Handle the device with care to avoid static discharge, which can damage the sensitive components.

By following these instructions, you can ensure optimal performance and reliability of the OP07C operational amplifier in your circuits.

(For reference only)