74AHC14PW+118: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	V_CC	1.8	-	5.5	V
Input Low Voltage	V_IL	-	0.8	-	V (V_CC=5.5V)
Input High Voltage	V_IH	-	2.0	-	V (V_CC=5.5V)
Output Low Voltage	V_OL	-	0.1	0.4	V (I_OL=4mA, V_CC=5.5V)
Output High Voltage	V_OH	4.5	5.0	-	V (I_OH=-4mA, V_CC=5.5V)
Propagation Delay Time	t_pd	-	6	12	ns (V_CC=5.5V, V_OH=3.5V, V_OL=1.5V)
Power Consumption	P_tot	-	20	-	mW (V_CC=5.5V, f=1MHz)
Operating Temperature	T_OP	-40	-	85	°C
Storage Temperature	T_STG	-65	-	150	°C

Power Supply:
- Ensure the supply voltage (V_CC) is within the range of 1.8V to 5.5V.
- Connect the ground (GND) pin to a stable 0V reference.
Input Signals:
- Apply input signals that meet the specified input low (V_IL) and input high (V_IH) voltages.
- Avoid exceeding the maximum input voltage, which should not exceed V_CC.
Output Signals:
- The output signals will be driven to either V_OL or V_OH depending on the input state.
- Ensure the load connected to the output does not exceed the maximum current ratings.
Propagation Delay:
- The propagation delay time (t_pd) is the time it takes for the output to change state after the input changes.
- This value can vary based on the supply voltage and temperature.
Temperature Considerations:
- Operate the device within the specified operating temperature range (-40°C to 85°C).
- Store the device within the storage temperature range (-65°C to 150°C).
Power Consumption:
- Monitor the power consumption, especially at higher frequencies, to ensure it does not exceed the maximum allowable power dissipation.
Handling and Storage:
- Handle the device with care to avoid damage from electrostatic discharge (ESD).
- Store the device in a dry environment to prevent moisture-related issues.

(For reference only)