ACPL-072L
ACPL-072L

 

ACPL-072L

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY ACPL-072L https://www.utsource.net/itm/p/11653968.html

Parameter Symbol Min Typ Max Unit Conditions
Input Forward Voltage VF - 1.25 1.45 V IF = 20 mA
Input Reverse Breakdown Voltage VBR 5.0 - 6.0 V IR = 1 mA
Input Current at 1.2V IF(1.2V) 0.1 0.2 0.3 mA VF = 1.2V
Output Collector-Emitter Saturation Voltage VCE(sat) - 0.3 0.5 V IC = 10 mA, VE = 0V
Output Collector Leakage Current ICBO - 100 300 nA VCE = 5V, TA = 25°C
Propagation Delay Time tPLH, tPHL - 5 10 μs IF = 20 mA, VCC = 5V, RL = 1 kΩ, CL = 15 pF
Storage Temperature Range TSTG -40 - 105 °C -
Operating Temperature Range TA -40 - 85 °C -

Instructions for Use

  1. Power Supply:

    • Ensure the supply voltage (VCC) is within the specified range to avoid damage to the device.
    • A typical operating voltage is 5V.

  2. Input Current:

    • The input current (IF) should be set to the recommended value of 20 mA for optimal performance.
    • Ensure the input current does not exceed the maximum rating to prevent overheating or damage.

  3. Output Load:

    • Connect the load resistor (RL) between the collector and the power supply.
    • The load resistor should be chosen based on the required current and voltage drop across the device.

  4. Temperature Considerations:

    • Operate the device within the specified temperature range to ensure reliable performance.
    • Avoid exposing the device to temperatures outside the storage and operating limits.

  5. Signal Integrity:

    • Keep signal traces as short as possible to minimize noise and interference.
    • Use appropriate decoupling capacitors near the power supply pins to filter out noise.

  6. Handling:

    • Handle the device with care to avoid static discharge, which can damage sensitive components.
    • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

  7. Testing:

    • Test the device under controlled conditions to verify its performance before integrating it into a larger system.
    • Use a multimeter to check the input and output voltages and currents to ensure they meet the specifications.

By following these instructions, you can ensure the ACPL-072L operates reliably and efficiently in your application.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag