CAT28F010N-90T: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7	-	3.6	V
Standby Current	Icc	Vcc = 3.0V	-	1	-	μA
Active Current	Icc	Vcc = 3.0V, Reading	-	5	-	mA
Write Current	Icc	Vcc = 3.0V, Writing	-	10	-	mA
Output High Voltage	VOH	Vcc = 3.0V, IO = -1mA	2.4	-	-	V
Output Low Voltage	VOL	Vcc = 3.0V, IO = 1mA	-	-	0.4	V
Access Time	tACC	Vcc = 3.0V, TA = 25°C	70	-	-	ns
Write Cycle Time	tWC	Vcc = 3.0V, TA = 25°C	5	-	-	ms
Block Erase Time	tBE	Vcc = 3.0V, TA = 25°C	10	-	-	ms
Chip Erase Time	tCE	Vcc = 3.0V, TA = 25°C	50	-	-	ms
Data Retention	-	-	10	-	-	years

Power Supply:
- Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
- The device operates with low standby current, typically 1 μA at 3.0V.
Current Consumption:
- Active current during read operations is typically 5 mA at 3.0V.
- Write current is typically 10 mA at 3.0V.
Output Levels:
- Output high voltage (VOH) should be at least 2.4V when Vcc = 3.0V and IO = -1mA.
- Output low voltage (VOL) should not exceed 0.4V when Vcc = 3.0V and IO = 1mA.
Timing Parameters:
- Access time (tACC) is 70 ns under typical conditions.
- Write cycle time (tWC) is 5 ms.
- Block erase time (tBE) is 10 ms.
- Chip erase time (tCE) is 50 ms.
Data Retention:
- The device guarantees data retention for at least 10 years.
Handling and Storage:
- Store the device in a dry, cool environment to prevent damage.
- Handle with care to avoid static discharge which can damage the device.
Programming:
- Follow the specific programming sequences provided in the datasheet for write and erase operations.
- Ensure proper timing and voltage levels during these operations to avoid data corruption.
Environmental Conditions:
- Operate the device within the specified temperature range to ensure reliable performance.

For detailed programming sequences and additional specifications, refer to the full datasheet of the CAT28F010N-90T.

(For reference only)