PS2501-1-A

PS2501-1-A

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY PS2501-1-A https://www.utsource.net/itm/p/1917417.html
HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES

Parameter Description Value
Part Number Full part number PS2501-1-A
Type Device type Optocoupler
Package Package type SOP-4
Isolation Voltage (VIORM) Maximum repetitive peak isolation voltage 2500 Vrms
Collector-Emitter Voltage (VCE) Maximum collector-emitter voltage 70 V
Emitter-Collector Voltage (VEC) Maximum emitter-collector voltage 5 V
Collector Current (IC) Maximum collector current 50 mA
Forward Current (IF) Maximum forward current 60 mA
Storage Temperature (TSTG) Operating temperature range for storage -40°C to +110°C
Operating Temperature (TOPR) Operating temperature range -40°C to +105°C
Current Transfer Ratio (CTR) Minimum current transfer ratio at IF = 5 mA, VCE = 5 V 100% to 200%
Rise Time (tr) Rise time at IF = 5 mA, VCE = 5 V 1 μs
Fall Time (tf) Fall time at IF = 5 mA, VCE = 5 V 1 μs
Propagation Delay (tPLH, tPHL) Propagation delay time at IF = 5 mA, VCE = 5 V 1 μs
Input Capacitance (CIN) Input capacitance at VFD = 5 V 4 pF
Output Capacitance (COUT) Output capacitance at VCE = 0 V 2 pF

Instructions for Use:

  1. Handling Precautions:

    • Handle the device with care to avoid mechanical damage.
    • Avoid exposing the device to high temperatures or humidity.
    • Use proper ESD protection when handling the device.
  2. Mounting:

    • Ensure that the device is mounted on a PCB with appropriate soldering conditions.
    • Follow the recommended soldering profile to prevent thermal damage.
  3. Electrical Connections:

    • Connect the input side (LED) to the control circuit.
    • Connect the output side (phototransistor) to the load circuit.
    • Ensure that the maximum ratings are not exceeded during operation.
  4. Testing:

    • Test the device under controlled conditions to ensure it meets the specified parameters.
    • Use a multimeter or oscilloscope to verify the CTR, rise time, fall time, and propagation delay.
  5. Storage:

    • Store the device in a dry, cool place away from direct sunlight.
    • Keep the device in its original packaging until ready for use.
  6. Troubleshooting:

    • If the device does not function as expected, check for proper connections and power supply.
    • Verify that the input current and output load are within the specified limits.
    • If issues persist, consult the datasheet or contact the manufacturer for further assistance.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited