TLP543J(TP5,N,F)
TLP543J(TP5,N,F)

 

TLP543J(TP5,N,F)

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TLP543J(TP5,N,F) https://www.utsource.net/itm/p/5293097.html

Parameter Symbol Min Typ Max Unit Condition
Forward Voltage VF - 1.2 1.6 V IF = 10 mA
Peak Forward Current IF(P) - - 50 mA tP = 1 ms, 1% duty cycle
Continuous Forward Current IF - - 10 mA
Reverse Voltage VRRM - - 5 V
Reverse Current IR - 0.1 1 μA VR = 5 V
Output Current IC - - 500 mA
Collector-Emitter Saturation Voltage VCE(sat) - 0.4 0.7 V IC = 500 mA, IF = 10 mA
Turn-On Time ton - 1.5 4 μs IF = 10 mA, RL = 200 Ω, VCC = 5 V
Turn-Off Time toff - 1.5 4 μs IF = 10 mA, RL = 200 Ω, VCC = 5 V
Isolation Voltage VIORM - - 2500 Vrms 1 minute
Operating Temperature TA -40 - 85 °C
Storage Temperature TSTG -40 - 125 °C

Instructions for Use:

  1. Mounting and Handling:

    • Handle the TLP543J with care to avoid mechanical stress.
    • Ensure proper mounting on a PCB to maintain thermal performance.

  2. Electrical Connections:

    • Connect the LED (input side) to the appropriate drive circuit ensuring the forward current does not exceed the maximum rating.
    • Connect the phototransistor (output side) to the load circuit, ensuring the collector-emitter voltage and current ratings are not exceeded.

  3. Thermal Management:

    • Ensure adequate heat dissipation if operating at high currents or temperatures.
    • Use a heatsink if necessary, especially when the output current is close to the maximum rating.

  4. Isolation:

    • The device provides electrical isolation between the input and output sides. Ensure that the isolation voltage is not exceeded to prevent damage.

  5. Testing:

    • Test the device under specified conditions to ensure it meets the required performance parameters.
    • Verify the turn-on and turn-off times using appropriate test circuits.

  6. Storage:

    • Store the device in a dry, cool place away from direct sunlight and corrosive environments.
    • Follow recommended storage temperature limits to ensure long-term reliability.

  7. Compliance:

    • Ensure that the device complies with relevant safety and regulatory standards for your application.

By following these instructions, you can ensure optimal performance and longevity of the TLP543J optocoupler.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag