Description
BUY TLP700 https://www.utsource.net/itm/p/5854431.html
Optocoupler - IC Output, 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 11-5J1, SURFACE MOUNT, DIP-6
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Conditions |
| Forward Voltage |
VF |
- |
1.2 |
1.6 |
V |
IF = 20 mA |
| Reverse Voltage |
VR |
- |
- |
5 |
V |
|
| Peak Forward Current |
IF(PK) |
- |
- |
30 |
mA |
t < 1 ms, IF(AV) = 10 mA |
| Continuous Forward Current |
IF(AV) |
- |
10 |
20 |
mA |
TA = 25°C |
| Output Collector-Emitter Voltage |
VCE(OFF) |
- |
- |
0.5 |
V |
IF = 0, IO = 0 |
| Output Collector Current |
IC |
- |
5 |
10 |
mA |
IF = 5 mA, VCE = 5 V |
| Isolation Voltage |
VIORM |
- |
- |
2500 |
Vrms |
1 min, 50/60 Hz |
| Storage Temperature |
TSTG |
-40 |
- |
110 |
°C |
|
| Operating Temperature |
TA |
-40 |
- |
85 |
°C |
|
Instructions for Use:
Forward Voltage (VF):
- Ensure that the forward voltage across the LED does not exceed 1.6V to prevent damage.
- Typical operating voltage is around 1.2V at a forward current of 20 mA.
Reverse Voltage (VR):
- The maximum reverse voltage that can be applied is 5V. Exceeding this value can cause damage to the device.
Peak Forward Current (IF(PK)):
- The peak forward current should not exceed 30 mA for pulse durations less than 1 ms. The average forward current should not exceed 10 mA at room temperature (25°C).
Continuous Forward Current (IF(AV)):
- The continuous forward current should be kept below 20 mA to ensure reliable operation. At room temperature (25°C), a typical value is 10 mA.
Output Collector-Emitter Voltage (VCE(OFF)):
- When no current is flowing through the LED (IF = 0) and no output current is present (IO = 0), the collector-emitter voltage should not exceed 0.5V.
Output Collector Current (IC):
- The output collector current should be within the range of 5 to 10 mA when the forward current is 5 mA and the collector-emitter voltage is 5 V.
Isolation Voltage (VIORM):
- The device can withstand an isolation voltage of up to 2500 Vrms for 1 minute at 50/60 Hz. This ensures electrical isolation between the input and output sides.
Storage Temperature (TSTG):
- Store the device in a temperature range of -40°C to 110°C to avoid degradation or damage.
Operating Temperature (TA):
- The device is designed to operate in ambient temperatures ranging from -40°C to 85°C. Ensure that the operating environment does not exceed these limits.
Handling and Mounting:
- Handle the device with care to avoid mechanical stress.
- Ensure proper soldering techniques to avoid thermal shock and ensure a reliable connection.
- Follow the recommended PCB layout guidelines to minimize interference and improve performance.
(For reference only)
More detail about Utsource Holding Company Limited
