TLP152
TLP152

 

TLP152

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TLP152 https://www.utsource.net/itm/p/6487243.html
OPTOCOUPLER, GATE DRIVER, 3.75KV, SMDIP, No. of Channels:1 Channel, Optocoupler Case Style:Surface Mount DIP, No. of Pins:5Pins, Isolation Voltage:3.75kV, Packaging:Each, Product Range:-, MSL:MSL 1 - Unlimited, No. of Chann , RoHS Compliant: Yes

Parameter Symbol Min Typ Max Unit Conditions
Forward Voltage VF - 1.2 1.6 V IF = 20 mA, TA = 25°C
Peak Forward Current IF(PK) - - 30 mA t < 1 ms, TA = 25°C
Continuous Forward Current IF - - 20 mA TA = 25°C
Reverse Voltage VR - - 5 V TA = 25°C
Output Collector-Emitter Saturation Voltage VCE(SAT) - 0.3 0.5 V IC = 5 mA, IF = 5 mA, TA = 25°C
Output Collector Current IC - - 50 mA TA = 25°C
Current Transfer Ratio (CTR) CTR 100 200 400 % IF = 5 mA, IC = 5 mA, TA = 25°C
Isolation Voltage VIORM - - 3750 Vrms 1 minute, 50/60 Hz
Storage Temperature Range TSTG -40 - 105 °C -
Operating Temperature Range TA -40 - 85 °C -

Instructions for Use:

  1. Forward Current (IF):

    • Ensure that the forward current does not exceed 20 mA continuously to avoid damaging the device.
    • For pulse applications, the peak forward current can be up to 30 mA for durations less than 1 ms.

  2. Reverse Voltage (VR):

    • The device should not be subjected to reverse voltages exceeding 5 V to prevent damage.

  3. Output Collector-Emitter Saturation Voltage (VCE(SAT)):

    • When the output is saturated, the voltage across the collector and emitter should be kept below 0.5 V to ensure proper operation.

  4. Current Transfer Ratio (CTR):

    • The CTR is a measure of the efficiency of the optocoupler. It indicates the ratio of the output collector current (IC) to the input forward current (IF). The typical CTR is 200%, but it can range from 100% to 400%.

  5. Isolation Voltage (VIORM):

    • The device provides electrical isolation up to 3750 Vrms for 1 minute at 50/60 Hz. This ensures safety and prevents electrical interference between the input and output circuits.

  6. Temperature Considerations:

    • The storage temperature range is -40°C to 105°C, and the operating temperature range is -40°C to 85°C. Ensure that the device is used within these limits to avoid thermal stress and potential failure.

  7. Mounting and Handling:

    • Handle the device with care to avoid mechanical stress and electrostatic discharge (ESD). Follow standard ESD protection procedures during handling and installation.

  8. Soldering:

    • Use a soldering iron with a temperature not exceeding 300°C and complete the soldering process within 10 seconds to avoid thermal damage to the device.

  9. Testing:

    • Before integrating the TLP152 into a circuit, test its parameters to ensure it meets the specified values. This can help identify any potential issues early in the development process.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag