Description
BUY HCPL-J314-300E https://www.utsource.net/itm/p/6487940.html
OPTOISO 3.75KV GATE DRVR 8DIP GW
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
| Forward Voltage (LED) |
VF |
1.1 |
1.5 |
2.0 |
V |
| Forward Current (LED) |
IF |
- |
20 |
50 |
mA |
| Reverse Voltage (LED) |
VR |
- |
5 |
8 |
V |
| Output Collector-Emitter Saturation Voltage |
VCE(sat) |
- |
0.5 |
1.5 |
V |
| Output Collector-Emitter Breakdown Voltage |
BVCBO |
40 |
- |
60 |
V |
| Output Collector Current |
IC |
- |
100 |
150 |
mA |
| Isolation Voltage |
VIORM |
- |
- |
2500 |
Vrms |
| Propagation Delay Time |
tPLH |
1 |
4 |
7 |
μs |
| Storage Temperature |
Tstg |
-40 |
- |
125 |
°C |
| Operating Temperature |
Topr |
-40 |
- |
105 |
°C |
Instructions:
- Power Supply: Ensure the supply voltage is within the specified range to avoid damaging the component.
- Current Limiting: Use a current-limiting resistor for the LED to prevent exceeding the maximum forward current (IF).
- Heat Dissipation: The device should be mounted on a heatsink if operating at high currents or temperatures to ensure reliable operation.
- Isolation: Maintain the isolation voltage (VIORM) to ensure safe operation and compliance with safety standards.
- Temperature Monitoring: Monitor the operating temperature to stay within the specified range to prevent thermal damage.
- Signal Integrity: Keep the propagation delay time (tPLH) in mind when designing circuits to ensure proper timing and signal integrity.
- Storage: Store the component in a dry, cool place to prevent moisture damage and ensure long-term reliability.
(For reference only)
More detail about Utsource Holding Company Limited
