TLP181(GB.TPL.F
TLP181(GB.TPL.F

 

TLP181(GB.TPL.F

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TLP181(GB.TPL.F https://www.utsource.net/itm/p/9509631.html

Parameter Symbol Min Typ Max Unit Conditions
Forward Voltage VF - 1.2 1.5 V IF = 20 mA
Peak Forward Current IF(P) - - 30 mA tp = 10 ms, Duty Cycle ≤ 1%
Continuous Forward Current IF - - 20 mA Ta = 25°C
Reverse Voltage VR - - 5 V
Output Collector-Emitter Saturation Voltage VCE(sat) - 0.3 0.6 V IF = 20 mA, IC = 100 mA
Output Collector Current IC - - 100 mA VCE = 5 V
Output Turn-On Time ton - 1 4 μs IF = 20 mA, RL = 1 kΩ, VCC = 5 V
Output Turn-Off Time toff - 1 4 μs IF = 20 mA, RL = 1 kΩ, VCC = 5 V
Storage Temperature Range Tstg -40 - 100 °C
Operating Temperature Range TA -40 - 85 °C

Instructions for Use:

  1. Forward Current (IF):

    • Ensure that the forward current does not exceed 20 mA continuously to avoid damaging the device.
    • For peak conditions, the forward current can be up to 30 mA, but only for short durations (tp = 10 ms) and with a duty cycle of ≤ 1%.

  2. Reverse Voltage (VR):

    • The device should not be subjected to reverse voltages exceeding 5 V to prevent breakdown.

  3. Collector-Emitter Saturation Voltage (VCE(sat)):

    • When the device is on, the collector-emitter voltage should be kept below 0.6 V to ensure efficient operation. This is typically achieved with a forward current of 20 mA and a collector current of 100 mA.

  4. Collector Current (IC):

    • The maximum collector current should not exceed 100 mA to avoid overheating and potential damage to the device.

  5. Turn-On and Turn-Off Times:

    • The turn-on and turn-off times are crucial for high-speed applications. Ensure that the load resistance (RL) and supply voltage (VCC) are within the specified ranges to achieve the typical values of 1 μs.

  6. Temperature Considerations:

    • Store the device within the temperature range of -40°C to 100°C.
    • Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.

  7. Mounting and Handling:

    • Handle the device with care to avoid mechanical stress or damage.
    • Follow proper soldering techniques to ensure good electrical connections and prevent thermal damage.

  8. Electrostatic Discharge (ESD) Protection:

    • Use appropriate ESD protection measures during handling and assembly to prevent damage from static electricity.

By adhering to these parameters and instructions, you can ensure the reliable and efficient operation of the TLP181(GB.TPL.F optocoupler.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag