HCPL-3100-500E
HCPL-3100-500E

 

HCPL-3100-500E

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY HCPL-3100-500E https://www.utsource.net/itm/p/9517152.html

Parameter Symbol Min Typ Max Unit Description
Input Current IF(ON) - 1.6 20 mA Forward current required to turn on the optocoupler.
Input Voltage VF 1.1 1.4 1.7 V Forward voltage drop across the LED when IF = 20 mA.
Output Collector-Emitter VCE(OFF) - 0.1 0.5 V Maximum collector-emitter voltage when the output is off (IF = 0).
Output Collector Current IC - - 15 mA Maximum collector current when the output is on.
Isolation Voltage VIORM - - 5000 V Maximum repetitive peak isolation voltage.
Propagation Delay Time tPLH 2 5 8 μs Time delay from input rising edge to output rising edge.
Propagation Delay Time tPHL 2 5 8 μs Time delay from input falling edge to output falling edge.
Storage Temperature Tstg -40 - 105 °C Temperature range for storage and operation.
Operating Temperature Topr -40 - 105 °C Temperature range for continuous operation.

Instructions for Use:

  1. Power Supply:

    • Ensure the input voltage (VF) is within the specified range to avoid damaging the LED.
    • The output side should be powered with a voltage that does not exceed the maximum collector-emitter voltage (VCE).

  2. Current Limiting:

    • Use a current-limiting resistor on the input side to ensure the forward current (IF) is within the recommended range (1.6 to 20 mA).

  3. Isolation:

    • The HCPL-3100-500E provides galvanic isolation up to 5000 V. Ensure that the isolation barrier is not exceeded to maintain safety and performance.

  4. Signal Timing:

    • Consider the propagation delay times (tPLH and tPHL) when designing circuits that require precise timing.

  5. Temperature Considerations:

    • Operate the device within the specified temperature ranges to ensure reliable performance and longevity.

  6. Mounting:

    • Follow proper soldering techniques and ensure good thermal management, especially if operating at high temperatures or currents.

  7. Storage:

    • Store the device in a dry, cool place to prevent damage from moisture or extreme temperatures.

  8. Handling:

    • Handle the device with care to avoid static discharge, which can damage sensitive components. Use ESD protection where necessary.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag