TLP280-4GB SOP16
TLP280-4GB SOP16

 

TLP280-4GB SOP16

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TLP280-4GB SOP16 https://www.utsource.net/itm/p/11258289.html

Parameter Symbol Min Typ Max Unit Conditions
Forward Voltage (IF = 20mA) VF 1.0 1.3 1.6 V
Reverse Voltage VR -50 -100 V
Forward Current IF 20 50 mA
Peak Forward Current IFP 100 mA tP = 10 ms, duty cycle ≤ 1%
Operating Temperature TOPR -40 85 °C
Storage Temperature TSTG -40 125 °C
Isolation Voltage VIORM 2500 5000 Vrms 1 min, I < 1 mA
Propagation Delay Time tpPLH 1.0 2.0 3.0 μs IF = 20 mA, VDD = 5 V, RL = 1 kΩ
Propagation Delay Time tpPHL 1.0 2.0 3.0 μs IF = 20 mA, VDD = 5 V, RL = 1 kΩ
Output High Level Voltage VOH 3.5 4.5 5.0 V IF = 20 mA, VDD = 5 V, IL = 1 mA
Output Low Level Voltage VOL 0.1 0.4 0.5 V IF = 20 mA, VDD = 5 V, IL = 16 mA
Leakage Current IOL 0.1 μA VDD = 0 V, VOUT = 5 V
Input Capacitance CIN 10 20 pF f = 1 MHz
Output Capacitance COUT 5 10 pF f = 1 MHz

Instructions for Use:

  1. Power Supply:

    • Ensure the power supply voltage (VDD) is within the specified range to avoid damage to the device.
    • Use a stable power supply to maintain consistent performance.

  2. Forward Current:

    • Do not exceed the maximum forward current (IF) of 50 mA to prevent overheating and potential damage.
    • For peak applications, ensure the peak forward current (IFP) does not exceed 100 mA with a pulse width of 10 ms and a duty cycle of ≤ 1%.

  3. Temperature:

    • Operate the device within the specified operating temperature range (-40°C to 85°C).
    • Store the device within the storage temperature range (-40°C to 125°C).

  4. Isolation:

    • The device provides isolation up to 5000 Vrms for 1 minute. Ensure that the isolation voltage (VIORM) is not exceeded to maintain safety and functionality.

  5. Propagation Delay:

    • The propagation delay times (tpPLH and tpPHL) are critical for timing-sensitive applications. Ensure these values are within the specified range for reliable operation.

  6. Output Levels:

    • Verify that the output high level voltage (VOH) and output low level voltage (VOL) meet the requirements of the connected circuit to ensure proper logic levels.

  7. Capacitance:

    • Consider the input and output capacitances (CIN and COUT) when designing the circuit to avoid signal degradation or timing issues.

  8. Leakage Current:

    • The leakage current (IOL) should be kept below 0.1 μA to ensure reliable operation, especially in low-power applications.

  9. Handling:

    • Handle the device with care to avoid static discharge, which can damage the sensitive components.
    • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

  10. Mounting:

    • Ensure proper mounting on the PCB to maintain good thermal dissipation and mechanical stability.
    • Follow the recommended soldering profile to avoid thermal shock and ensure a strong bond.

By following these parameters and instructions, you can ensure optimal performance and reliability of the TLP280-4GB SOP16 optocoupler in your application.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag