MOC3023SR2M: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	V_F	IF = 20 mA	-	1.2	1.5	V
Peak Reverse Voltage	V_RRM	Non-repetitive	-	-	600	V
Peak Repetitive Reverse Voltage	V_RRM	Repetitive	-	-	400	V
Forward Current	I_F	Continuous	-	20	30	mA
Peak Pulse Forward Current	I_FPM	t_p = 10 ms, Duty Cycle ≤ 1%	-	100	-	mA
Zero Cross Detection Range	V_ZC	-	0	1.5	3.5	V
Output Turn-On Time	t_on	V_DD = 220 VAC, R_L = 100 Ω	-	1.5	3.0	ms
Output Turn-Off Time	t_off	V_DD = 220 VAC, R_L = 100 Ω	-	1.5	3.0	ms
Isolation Voltage	V_IORM	1 minute, 50/60 Hz	-	-	4000	V_RMS
Operating Temperature	T_A	Storage and Operation	-40	-	100	°C
Storage Temperature	T_STG	-	-40	-	100	°C

Forward Voltage (V_F):
- Ensure the forward voltage across the device does not exceed 1.5V when the forward current is 20mA.
Peak Reverse Voltage (V_RRM):
- The device can withstand up to 600V in non-repetitive reverse conditions.
Peak Repetitive Reverse Voltage (V_{R RM}):
- For repetitive reverse conditions, ensure the voltage does not exceed 400V.
Forward Current (I_F):
- The continuous forward current should not exceed 30mA, with a typical value of 20mA.
Peak Pulse Forward Current (I_FPM):
- The peak pulse forward current should not exceed 100mA for pulses of 10ms duration and a duty cycle of ≤1%.
Zero Cross Detection Range (V_ZC):
- The zero cross detection range is between 0 and 3.5V, with a typical value of 1.5V.
Output Turn-On and Turn-Off Time (t_on, t_off):
- The turn-on and turn-off times are typically 1.5ms and should not exceed 3.0ms under standard operating conditions.
Isolation Voltage (V_IORM):
- The device provides isolation up to 4000V_RMS for 1 minute at 50/60Hz.
Operating and Storage Temperature (T_A, T_STG):
- The device can operate and be stored within a temperature range of -40°C to 100°C.

Static Sensitivity: Handle the device with care to avoid damage from static electricity.
Moisture Sensitivity: Store the device in a dry environment to prevent moisture damage.
Physical Handling: Avoid applying excessive force or bending to the leads.

Circuit Design: Ensure the circuit design accounts for the maximum ratings and typical parameters to ensure reliable operation.
Thermal Management: Consider thermal management techniques if the device will be operating near its maximum current or temperature limits.
Testing: Test the device under actual operating conditions to verify performance and reliability.

(For reference only)