CNY172M CNY172DIP6

BUY CNY172M CNY172DIP6 https://www.utsource.net/itm/p/11554553.html

Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the leads and the body.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Mounting:

   • Ensure that the device is mounted correctly according to the pinout diagram.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Avoid excessive mechanical stress on the leads during soldering and assembly.

3. Electrical Connections:

   • Connect the LED side to the appropriate driving circuit, ensuring that the forward current does not exceed 20mA continuously.
   • Connect the phototransistor side to the load or signal conditioning circuit, ensuring that the collector current does not exceed 50mA.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high currents or temperatures.
   • Use a heatsink if necessary to maintain the junction temperature within the specified range.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter or appropriate test equipment to verify the forward voltage and other electrical characteristics.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Keep in original packaging until ready for use to protect from static and physical damage.

7. Pinout:

   • Refer to the datasheet for the specific pinout configuration of the CNY172DIP6 package.

Pinout Diagram:

    _______
   /         /  1  2  3  /   4  5  6   ___________/
 
 1 - Anode (LED)
 2 - Cathode (LED)
 3 - Collector (Phototransistor)
 4 - Emitter (Phototransistor)
 5 - NC (Not Connected)
 6 - NC (Not Connected)