HCF4047BF: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	V_CC	3	-	15	V	Operating supply voltage range
Output Current	I_O	-	2.5	16	mA	Maximum output current per output pin
Input Current	I_I	-	1	10	μA	Maximum input current per input pin
Propagation Delay Time	t_pd	-	100	300	ns	Typical propagation delay time at V_CC = 5V
Power Dissipation	P_TOT	-	-	500	mW	Total power dissipation
Operating Temperature Range	T_A	-40	-	85	°C	Ambient temperature range
Storage Temperature Range	T_STG	-65	-	150	°C	Temperature range for storage
Maximum Junction Temperature	T_J(max)	-	-	150	°C	Maximum junction temperature

Power Supply:
- Ensure that the supply voltage (V_CC) is within the range of 3V to 15V.
- Connect the ground (GND) pin to a stable ground reference.
Input Signals:
- Apply input signals to the appropriate input pins.
- Ensure that the input current does not exceed 10 μA to avoid damaging the device.
Output Loads:
- Connect the load to the output pins.
- Ensure that the output current does not exceed 16 mA to prevent damage to the output transistors.
Propagation Delay:
- Consider the typical propagation delay time of 100 ns to 300 ns when designing your circuit to ensure proper timing.
Thermal Management:
- Keep the ambient temperature within the operating range of -40°C to 85°C.
- Ensure adequate heat dissipation to keep the junction temperature below 150°C.
Storage:
- Store the device in a temperature-controlled environment between -65°C and 150°C to prevent damage.
Handling:
- Handle the device with care to avoid static discharge, which can damage the sensitive components.
- Use proper ESD protection measures during handling and installation.
Testing:
- Test the device under the specified operating conditions to ensure it meets the required performance parameters.
Mounting:
- Mount the device on a suitable PCB with appropriate soldering techniques to ensure reliable connections.

(For reference only)