MOC3063S-TA1
MOC3063S-TA1

 

MOC3063S-TA1

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY MOC3063S-TA1 https://www.utsource.net/itm/p/11246210.html

Parameter Symbol Conditions Min Typ Max Unit
Forward Voltage VF IF = 20 mA 1.1 1.3 1.5 V
Reverse Breakdown Voltage VR IR = 1 mA 5 - 7 V
Peak Forward Current IF(peak) t = 10 ms, duty cycle = 1/1000 50 - - mA
Continuous Forward Current IF(avg) TA = 25°C - 10 - mA
Turn-On Time ton IF = 20 mA, RL = 1 kΩ - 4 8 μs
Turn-Off Time toff IF = 20 mA, RL = 1 kΩ - 4 8 μs
Isolation Voltage VIORM 1 minute, 50/60 Hz - - 4000 Vrms
Operating Temperature Range TA - -40 - 105 °C
Storage Temperature Range TSTG - -55 - 150 °C

Instructions for Using MOC3063S-TA1

  1. Mounting and Handling:

    • Handle the device with care to avoid mechanical stress.
    • Ensure proper alignment and orientation during mounting to prevent short circuits.

  2. Electrical Connections:

    • Connect the anode (A) and cathode (K) terminals correctly to the control circuit.
    • Connect the output terminals (MT1 and MT2) to the load and power supply.

  3. Heat Dissipation:

    • Ensure adequate heat dissipation if operating at high currents or temperatures.
    • Use a heatsink if necessary to maintain the device within its specified temperature range.

  4. Forward Current:

    • Do not exceed the peak forward current (IF(peak)) for more than 10 ms in any 1000 ms period.
    • Keep the continuous forward current (IF(avg)) within the specified limits to avoid overheating.

  5. Reverse Voltage:

    • Ensure that the reverse voltage applied does not exceed the maximum reverse breakdown voltage (VR).

  6. Isolation:

    • Maintain the isolation voltage (VIORM) to ensure safe operation and prevent electrical breakdown between the input and output sides.

  7. Temperature:

    • Operate the device within the specified operating temperature range (TA) to ensure reliable performance.
    • Store the device within the storage temperature range (TSTG) to prevent damage.

  8. Testing:

    • Perform initial testing under controlled conditions to verify proper operation.
    • Regularly inspect the device for signs of wear or damage.

By following these guidelines, you can ensure optimal performance and longevity of the MOC3063S-TA1 optocoupler.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag