AD845JN: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY AD845JN https://www.utsource.net/itm/p/18993.html
Precision, 16 MHz CBFET Op Amp

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	V_CC	-	4.75	-	5.25	V
Input Voltage Range	V_I	-	0	-	V_CC - 1.5	V
Output Voltage Range	V_O	-	0	-	V_CC - 1.5	V
Bandwidth	f_BW	V_CC = 5V	-	10	-	MHz
Slew Rate	SR	V_CC = 5V	-	13	-	V/μs
Large Signal Voltage Gain	A_V	V_CC = 5V, f = 1kHz	-	1000	-	V/V
Input Bias Current	I_B	V_CC = 5V	-	10	-	nA
Input Offset Voltage	V_OS	V_CC = 5V	-1	0	1	mV
Power Consumption	P_D	V_CC = 5V	-	15	-	mW

Power Supply:
- Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
- Connect the power supply to the V_CC pin and ground to the GND pin.
Input Signals:
- The input voltage (V_I) should be within the range of 0V to (V_CC - 1.5V).
- Connect the input signal to the IN+ and IN- pins as required.
Output Signals:
- The output voltage (V_O) will be within the range of 0V to (V_CC - 1.5V).
- Connect the load or next stage circuit to the OUT pin.
Operational Considerations:
- The AD845JN has a bandwidth of 10 MHz and a slew rate of 13 V/μs, making it suitable for high-speed applications.
- The large signal voltage gain is 1000 V/V at 1 kHz, ensuring good amplification performance.
- The input bias current is typically 10 nA, which is low enough to minimize loading effects on the input source.
- The input offset voltage is ±1 mV, which helps in maintaining accuracy in the output signal.
Power Consumption:
- The typical power consumption is 15 mW at 5V supply, which is relatively low for high-speed operational amplifiers.
Stability and Compensation:
- The AD845JN is internally compensated for stability, but external compensation may be required for specific applications to ensure stable operation.
Handling and Storage:
- Handle the device with care to avoid static damage.
- Store in a dry, cool place away from direct sunlight and extreme temperatures.

(For reference only)