TL061CN

BUY TL061CN https://www.utsource.net/itm/p/159137.html
LOW POWER J-FET SINGLE OPERATIONAL AMPLIFIER

Instructions for Use

1. Power Supply:

   • The TL061CN operates with a single supply voltage ranging from 3.0V to 16.0V. Ensure the supply voltage is within this range to avoid damage to the device.

2. Input Voltage:

   • The input voltage should be within the range of 0V to V_CC - 1.5V. Exceeding these limits can cause distortion or damage.

3. Output Voltage:

   • The output voltage swing is from 0V to V_CC - 2.0V. Design your circuit to accommodate this range to avoid clipping.

4. Bias and Offset:

   • The input bias current is typically 40nA, and the input offset current is typically 10nA. These values are important for high-impedance circuits.
   • The input offset voltage is typically 5mV. This can affect precision applications and may need to be compensated for.

5. Slew Rate:

   • The slew rate is 0.5V/μs. This limits the maximum rate of change of the output voltage and is crucial for high-frequency applications.

6. Bandwidth:

   • The bandwidth with a gain of 1 is typically 1.0MHz. This is the frequency at which the gain drops to 0.707 of its low-frequency value.

7. Gain:

   • The large signal voltage gain is typically 100dB. This is the gain at low frequencies and is important for amplification applications.

8. Power Consumption:

   • The power consumption is typically 1.0mW at a supply voltage of 5V with no load. Consider this when designing battery-powered or low-power systems.

9. Handling:

   • Handle the TL061CN with care to avoid static discharge, which can damage the device. Use proper ESD protection measures.

10. Mounting:

    • Ensure proper mounting on the PCB to avoid mechanical stress on the leads. Follow the recommended footprint and soldering guidelines provided by the manufacturer.