Description
BUY OPA627AM https://www.utsource.net/itm/p/523778.html
Precision High-Speed Difet OPERATIONAL AMPLIFIERS
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
VCC |
±5V to ±18V |
-18 |
|
18 |
V |
| Input Offset Voltage |
VIO |
VCM = 0V |
-0.2 |
0.1 |
0.4 |
mV |
| Input Bias Current |
IB |
VCM = 0V |
-10 |
2 |
10 |
nA |
| Input Offset Current |
IOS |
VCM = 0V |
-5 |
0.5 |
5 |
nA |
| Common-Mode Input Voltage Range |
VCM |
VCC = ±15V |
-13.5 |
|
13.5 |
V |
| Differential Input Voltage Range |
VID |
VCC = ±15V |
-30 |
|
30 |
V |
| Output Voltage Swing |
VOUT |
RL = 1kΩ, VCC = ±15V |
-14.5 |
|
14.5 |
V |
| Slew Rate |
SR |
VOUT = 10V step |
2500 |
|
|
V/μs |
| Gain Bandwidth Product |
GBP |
VCC = ±15V |
150 |
180 |
210 |
MHz |
| Large Signal Voltage Gain |
AV |
VCC = ±15V, RL = 1kΩ |
10000 |
20000 |
|
V/V |
| Noise Voltage |
en |
f = 1kHz |
|
1.9 |
|
nV/√Hz |
| Noise Current |
in |
f = 1kHz |
|
0.5 |
|
pA/√Hz |
| Quiescent Current |
IQ |
VCC = ±15V |
2.5 |
3.5 |
4.5 |
mA |
Instructions for Using OPA627AM:
Power Supply:
- The OPA627AM can operate with a supply voltage range from ±5V to ±18V.
- Ensure that the power supply is stable and clean to avoid noise and instability.
Input Signals:
- The common-mode input voltage range is from -13.5V to +13.5V when the supply voltage is ±15V.
- The differential input voltage range is ±30V under the same conditions.
- Use appropriate input protection circuits if the input signals exceed these ranges.
Output Configuration:
- The output voltage swing is ±14.5V with a load resistance of 1kΩ and a supply voltage of ±15V.
- For optimal performance, ensure that the load impedance is within the recommended range.
Stability and Compensation:
- The OPA627AM is internally compensated for unity gain stability.
- External compensation may be required for specific applications or to achieve higher stability margins.
Noise Considerations:
- The noise voltage is 1.9 nV/√Hz at 1kHz, and the noise current is 0.5 pA/√Hz at 1kHz.
- Use low-noise power supplies and shielding to minimize external noise interference.
Temperature Range:
- The OPA627AM is designed for operation over the industrial temperature range of -40°C to +85°C.
- Ensure that the operating environment does not exceed these limits to maintain reliability.
Handling and Storage:
- Handle the device with care to avoid electrostatic discharge (ESD) damage.
- Store the device in a dry, cool place to prevent moisture-related issues.
Mounting and PCB Layout:
- Use proper PCB layout techniques to minimize parasitic capacitance and inductance.
- Place decoupling capacitors close to the power supply pins to reduce noise and improve stability.
Testing and Troubleshooting:
- Use a calibrated oscilloscope and signal generator for testing.
- Check for proper biasing and signal levels to ensure correct operation.
- If issues arise, refer to the datasheet for troubleshooting tips and application notes.
(For reference only)
More detail about Utsource Holding Company Limited
