LP324N

BUY LP324N https://www.utsource.net/itm/p/1273006.html
Ultra-Low-Power Quadruple Operational Amplifiers 14-PDIP 0 to 70

Instructions for Use:

1. Supply Voltage:

   • The LP324N can operate with a supply voltage ranging from 2.7V to 36V.
   • Ensure the supply voltage is within this range to avoid damage to the device.

2. Quiescent Current:

   • The quiescent current per amplifier is typically 10 μA at 5V.
   • This low current consumption makes the LP324N suitable for battery-powered applications.

3. Input Offset Voltage:

   • The input offset voltage ranges from 2 mV to 10 mV at 5V.
   • This parameter should be considered when designing precision circuits.

4. Input Bias Current:

   • The input bias current is typically 45 nA at 5V.
   • This low bias current reduces the impact on the input signal source.

5. Input Voltage Range:

   • The input voltage range extends from 0V to V_CC - 1.5V.
   • Ensure that input signals do not exceed these limits to prevent distortion or damage.

6. Output Voltage Swing:

   • The output voltage swing ranges from 0V to V_CC - 1.5V.
   • This ensures that the output can drive a wide range of loads.

7. Common-Mode Rejection Ratio (CMRR):

   • The CMRR is at least 80 dB at 5V.
   • This high CMRR helps in rejecting common-mode noise.

8. Power Supply Rejection Ratio (PSRR):

   • The PSRR is at least 80 dB at 5V.
   • This high PSRR helps in maintaining stable operation despite power supply variations.

9. Slew Rate:

   • The typical slew rate is 0.5 V/μs at 5V.
   • This parameter is important for high-frequency applications.

10. Operating Temperature Range:

    • The commercial operating temperature range is 0°C to 70°C.
    • The industrial operating temperature range is -40°C to 85°C.
    • Choose the appropriate version based on the environmental conditions of your application.