BUY AD823ANZ https://www.utsource.net/itm/p/1886280.html
The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output voltage swing extends to within 50 mV of each rail for I
OUT ≤ 100 μA, providing outstanding output dynamic range.
An offset voltage of 800 μV maximum, an offset voltage drift of 2 μV/°C, input bias currents below 25 pA, and low input voltage noise provide dc precision with source impedances up to a Gigaohm. It provides 16 MHz, ?3 dB bandwidth, ?108 dB THD @ 20 kHz, and a 22 V/μs slew rate with a low supply current of 2.6 mA per amplifier. The AD823 drives up to 500 pF of direct capacitive load as a follower and provides an output current of 15 mA, 0.5 V from the supply rails. This allows the amplifier to handle a wide range of load conditions.
This combination of ac and dc performance, plus the outstanding load drive capability, results in an exceptionally versatile amplifier for applications such as A/D drivers, high speed active filters, and other low voltage, high dynamic range systems.
The AD823 is available over the industrial temperature range of ?40°C to +85°C and is offered in both 8-lead PDIP and 8-lead SOIC packages.
Applications
Battery-powered precision instrumentation
Photodiode preamps
Active filters
12-bit to 16-bit data acquisition systems
Medical instrumentation
Description: The AD823ANZ is a low power, wide bandwidth, single-supply, voltage feedback amplifier.
Features:
Low power: 1.2 mA/amplifier
Wide bandwidth: 1.5 MHz
Single supply operation: 3 V to 15 V
High output current: ±20 mA
Low input offset voltage: ±50 μV
Low input bias current: ±50 nA
Low distortion: 0.0003%
Applications:
Video and imaging processing
Video line drivers
Video distribution amplifiers
Video switching
Video filters
Video gain blocks
Video/audio signal routing
(For reference only)
