Description
BUY PC3H4J00000F https://www.utsource.net/itm/p/12596256.html
| Parameter |
Description |
| Part Number |
PC3H4J00000F |
| Type |
DDR3 SDRAM |
| Capacity |
4 GB |
| Module Type |
UDIMM |
| Memory Organization |
512 M x 8 |
| Data Rate |
1600 MT/s (PC3-12800) |
| Voltage |
1.5V |
| CAS Latency (CL) |
11 |
| RAS# to CAS# Delay (tRCD) |
15 |
| Row Precharge Time (tRP) |
15 |
| Row Active Time (tRAS) |
32 |
| Refresh Cycle Time (tRFC) |
64 |
| Operating Temperature |
0°C to 85°C |
| Storage Temperature |
-40°C to 85°C |
| RoHS Compliance |
Yes |
| ECC Support |
No |
Instructions for Use:
Installation:
- Ensure the system is powered off before installing the module.
- Align the module with the slot, ensuring the notch on the module matches the key on the slot.
- Gently press down on both ends of the module until the retention clips snap into place.
Configuration:
- Check the system BIOS/UEFI settings to ensure the memory is recognized and configured correctly.
- Verify that the memory speed and timings are set to the specifications provided above.
Compatibility:
- This module is compatible with systems that support DDR3-1600 memory.
- Ensure the system motherboard has a compatible DIMM slot.
Maintenance:
- Periodically clean the contacts of the module with a soft, dry cloth or compressed air.
- Avoid touching the gold contacts to prevent corrosion or damage.
Troubleshooting:
- If the system does not recognize the memory, check the seating of the module and ensure it is securely installed.
- Verify that the system BIOS/UEFI is updated to the latest version for optimal compatibility.
- If issues persist, consult the system manual or contact technical support.
(For reference only)
More detail about Utsource Holding Company Limited
