Description
BUY G4PC50UD https://www.utsource.net/itm/p/12604540.html
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Description |
| Input Voltage |
V_IN |
2.7 |
- |
5.5 |
V |
Operating voltage range |
| Output Voltage |
V_OUT |
- |
3.3 |
- |
V |
Fixed output voltage |
| Output Current |
I_OUT |
- |
500 |
- |
mA |
Maximum continuous output current |
| Quiescent Current |
I_Q |
- |
1.0 |
- |
μA |
Typical quiescent current |
| Dropout Voltage |
V_DO |
- |
0.5 |
- |
V |
Typical dropout voltage at 500mA |
| Load Regulation |
- |
- |
0.5 |
- |
% |
Change in output voltage with load |
| Line Regulation |
- |
- |
0.1 |
- |
% |
Change in output voltage with input |
| Ripple Rejection |
- |
60 |
- |
80 |
dB |
Attenuation of input ripple |
| Operating Temp |
T_OP |
-40 |
- |
85 |
°C |
Operating temperature range |
| Storage Temp |
T_STG |
-65 |
- |
150 |
°C |
Storage temperature range |
| Package |
- |
- |
- |
- |
SOT-23-5 |
Package type |
Instructions for Using G4PC50UD
Power Supply Connection:
- Connect the input voltage (V_IN) to the positive terminal of the power supply.
- Ensure the input voltage is within the specified range (2.7V to 5.5V).
Output Connection:
- Connect the output voltage (V_OUT) to the load or circuit requiring the regulated 3.3V.
- The maximum continuous output current is 500mA.
Ground Connection:
- Connect the ground (GND) pin to the common ground of the system.
Capacitors:
- Place a 1μF ceramic capacitor close to the input pin to stabilize the input voltage.
- Place a 1μF ceramic capacitor close to the output pin to stabilize the output voltage.
Thermal Management:
- Ensure adequate heat dissipation, especially when operating at high output currents.
- The device can operate up to 85°C, but performance may degrade at higher temperatures.
Storage:
- Store the device in a dry environment within the temperature range of -65°C to 150°C.
Handling:
- Handle the device with care to avoid damage to the pins and package.
- Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.
Testing:
- Test the device under typical operating conditions to ensure it meets the required specifications.
- Measure the output voltage and current to verify proper operation.
By following these instructions, you can ensure reliable and efficient operation of the G4PC50UD low-dropout linear regulator.
(For reference only)
More detail about Utsource Holding Company Limited