Description
BUY G2R-2A-12VDC G2R-2A-ASI-12VDC 12V 5A 6PINS https://www.utsource.net/itm/p/12604541.html
| Parameter |
G2R-2A-12VDC / G2R-2A-ASI-12VDC |
| Supply Voltage |
12V DC |
| Rated Current |
5A |
| Number of Pins |
6 |
| Operating Temperature Range |
-20°C to +70°C |
| Storage Temperature Range |
-40°C to +85°C |
| Humidity Range |
5% to 95% (Non-condensing) |
| Insulation Resistance |
>100MΩ at 500V DC |
| Dielectric Strength |
1500V AC for 1 minute |
| Contact Resistance |
<50mΩ |
| Life Cycle |
10,000 operations |
Instructions:
Installation:
- Ensure the relay is installed in a well-ventilated area to prevent overheating.
- Connect the power supply to the designated pins as per the pinout diagram provided.
Wiring:
- Connect the 12V DC power supply to the power pins.
- Connect the control signal to the coil pins to activate the relay.
- Connect the load to the switch contacts.
Operation:
- Apply 12V DC to the coil pins to energize the relay.
- The normally open (NO) contacts will close, and the normally closed (NC) contacts will open when the relay is energized.
- When the power is removed from the coil, the relay returns to its default state.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Clean the relay with a soft, dry cloth to remove dust and debris.
Safety:
- Do not exceed the rated voltage and current specifications.
- Ensure the relay is disconnected from the power source before performing any maintenance or installation.
- Use appropriate fuses or circuit breakers to protect the relay from overcurrent conditions.
Storage:
- Store the relay in a dry, cool place away from direct sunlight and corrosive substances.
(For reference only)
More detail about Utsource Holding Company Limited
