BUY MC33072ADR2 https://www.utsource.net/itm/p/546019.html
High Slew Rate, Wide Bandwidth, Single Supply Operational Amplifiers
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | Operating | 2.0 | 36.0 | V | |
| Input Offset Voltage | Vio | -5 | 0 | 5 | mV | |
| Input Bias Current | Iib | -100 | 0 | 100 | nA | |
| Input Offset Current | Iios | -10 | 0 | 10 | nA | |
| Open Loop Gain (Large Signal) | Aol | Vout = 1Vpp | 70 | dB | ||
| Slew Rate | SR | 0.4 | V/μs | |||
| Output Short-Circuit Duration | tsc | Continuous | ms | |||
| Quiescent Current | IQ | 20 | μA | |||
| Common-Mode Rejection Ratio | CMRR | 80 | dB | |||
| Power Supply Rejection Ratio | PSRR | 80 | dB | |||
| Operating Temperature Range | Topr | Storage | -40 | 125 | °C |
Supply Voltage: Ensure the supply voltage is within the operating range of 2.0V to 36.0V. Exceeding this range can damage the device.
Input Signals: Keep input signals within the common-mode input voltage range to avoid distortion or damage. The input bias and offset currents should be considered when designing input circuits.
Output Load: Ensure the output load does not cause the output current to exceed safe levels, which could lead to overheating or damage.
Powering Up: Apply power carefully, ensuring that the power supply rise time is adequate to prevent latch-up conditions.
Thermal Considerations: Operate within the specified temperature range (-40°C to 125°C). For extended operation in high-temperature environments, ensure adequate heat dissipation.
Short Circuit Protection: While the device has some level of short-circuit protection, it is recommended to limit the duration of short circuits to avoid potential damage.
Decoupling Capacitors: Use appropriate decoupling capacitors close to the power supply pins to minimize noise and transient effects.
Layout Considerations: Follow good PCB layout practices to minimize parasitic inductances and capacitances, especially for high-frequency applications.
Storage and Handling: Store and handle the device in accordance with anti-static guidelines to prevent ESD damage.
