Elec-component
TC74HCT7007AF
TC74HCT7007AF

 

TC74HCT7007AF

Utsource Holding Company Limited flag
Category: Elec-component Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TC74HCT7007AF https://www.utsource.net/itm/p/146311.html
IC HCT SERIES, HEX 1-INPUT NON-INVERT GATE, PDSO14, 0.300 INCH, 1.27 MM PITCH, PLASTIC, SOP-14, Gate

Parameter Symbol Conditions Min Typ Max Unit
Supply Voltage VCC Operating 2.0 - 5.5 V
Input Voltage (High Level) VIH - 2.0 - VCC V
Input Voltage (Low Level) VIL - 0 - 0.8 V
Output Voltage (High Level) VOH IO = -1.6 mA - - VCC - 0.3 V
Output Voltage (Low Level) VOL IO = 16 mA - - 0.4 V
Input Leakage Current IIL VI = 0 to VCC -1 - 1 μA
Output Leakage Current IOL VO = 0 to VCC -1 - 1 μA
Propagation Delay Time (High to Low) tpd(HL) VCC = 5V, TA = 25°C 10 - 20 ns
Propagation Delay Time (Low to High) tpd(LH) VCC = 5V, TA = 25°C 10 - 20 ns
Operating Temperature Range TA - -40 - 85 °C
Storage Temperature Range TSTG - -65 - 150 °C

Instructions for Use:

  1. Power Supply: Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V.
  2. Input Levels:
    • For a high-level input (VIH), the voltage should be between 2.0V and VCC.
    • For a low-level input (VIL), the voltage should be between 0V and 0.8V.
  3. Output Levels:
    • The output high level (VOH) will be VCC - 0.3V when the output current (IO) is -1.6mA.
    • The output low level (VOL) will be 0.4V when the output current (IO) is 16mA.
  4. Leakage Current:
    • The input leakage current (IIL) should not exceed ±1μA.
    • The output leakage current (IOL) should not exceed ±1μA.
  5. Propagation Delay:
    • The propagation delay time (tpd) from high to low and low to high should be within 10ns to 20ns at VCC = 5V and TA = 25°C.
  6. Temperature Ranges:
    • The operating temperature range (TA) is from -40°C to 85°C.
    • The storage temperature range (TSTG) is from -65°C to 150°C.
  7. Handling:
    • Handle the device with care to avoid static damage.
    • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag