74HC251

BUY 74HC251 https://www.utsource.net/itm/p/908224.html
8-input multiplexer; 3-state

Instructions for Using 74HC251:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 6.0V to avoid damage to the IC.

2. Input Voltage Levels:

   • For a logic low input, ensure the voltage is below 1.5V.
   • For a logic high input, ensure the voltage is above 3.5V.

3. Output Voltage Levels:

   • When driving a load, the output low voltage should not exceed 0.1V when sourcing 8mA.
   • The output high voltage should be at least 4.5V when sinking -4mA.

4. Propagation Delay (t_pd):

   • The typical propagation delay time is 9ns. This is the time it takes for a change in the input signal to appear at the output.

5. Power Dissipation:

   • The maximum power dissipation is 100mW. Ensure adequate heat dissipation if operating near this limit.

6. Operating Temperature:

   • The IC is designed to operate within a temperature range of -40°C to 85°C. Ensure the ambient temperature does not exceed these limits.

7. Handling Precautions:

   • Handle the IC with care to avoid static damage. Use proper ESD protection when handling.
   • Ensure all connections are secure and correct to prevent short circuits or incorrect operation.

8. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration of the 74HC251. Each pin has a specific function, including data inputs, select lines, and output.

9. Testing:

   • Before integrating the 74HC251 into a circuit, test it using a known good setup to ensure it functions correctly.

10. Storage:

    • Store the IC in a dry, cool place away from direct sunlight and sources of heat.