Description
BUY 74HC540AP https://www.utsource.net/itm/p/1380745.html
Octal buffer/line driver; 3-state
| Parameter |
Symbol |
Conditions |
Min |
Typical |
Max |
Unit |
| Supply Voltage |
VCC |
Operating |
2.0 |
- |
6.0 |
V |
| Input Low Voltage |
VIL |
VCC = 5V |
0 |
- |
1.5 |
V |
| Input High Voltage |
VIH |
VCC = 5V |
3.5 |
- |
VCC |
V |
| Output Low Voltage |
VOL |
IOL = 4mA, VCC = 5V |
0 |
0.1 |
0.4 |
V |
| Output High Voltage |
VOH |
IOH = -0.4mA, VCC = 5V |
4.5 |
- |
VCC |
V |
| Input Leakage Current |
IIL |
VCC = 5V |
-1 |
- |
1 |
μA |
| Output Leakage Current |
IOL (High) |
VCC = 5V |
-1 |
- |
1 |
μA |
| Propagation Delay Time |
tp |
VCC = 5V, TA = 25°C |
- |
18 |
- |
ns |
| Power Consumption |
Ptot |
VCC = 5V, f = 10 MHz |
- |
200 |
- |
μW |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 2.0V to 6.0V.
- Connect the ground (GND) pin to a stable reference point.
Input Signals:
- Input signals should be within the valid logic levels:
- Low: 0V to 1.5V
- High: 3.5V to VCC
- Avoid applying voltages outside the specified range to prevent damage.
Output Signals:
- When driving loads, ensure that the output current does not exceed the maximum ratings:
- Output Low: 4mA
- Output High: -0.4mA
- Check the output voltage levels to ensure they meet the required logic levels.
Propagation Delay:
- The propagation delay time (tp) is typically 18ns at VCC = 5V and TA = 25°C. This can vary with different operating conditions.
Power Consumption:
- The typical power consumption is 200μW at VCC = 5V and f = 10MHz. Ensure adequate heat dissipation if operating at high frequencies or in high-temperature environments.
Handling Precautions:
- Handle the IC with care to avoid static discharge which can damage the device.
- Use appropriate decoupling capacitors near the power supply pins to filter out noise and stabilize the supply voltage.
Storage:
- Store the IC in a dry, cool place to prevent moisture damage.
- Follow anti-static storage guidelines to protect the device from ESD (Electrostatic Discharge).
By following these instructions, you can ensure reliable operation and longevity of the 74HC540AP IC.
(For reference only)
More detail about Utsource Holding Company Limited