74 series Digital Integrated Circuits
TC74HC132AF
TC74HC132AF

 

TC74HC132AF

Utsource Holding Company Limited flag
Category: 74 series Digital Integrated Circuits Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TC74HC132AF https://www.utsource.net/itm/p/1461104.html
Single 5 V Inductive Load Driver; Package: SOT-23 TO-236 3 LEAD; No of Pins: 3; Container: Tape and Reel; Qty per Container: 3000

Below is the parameter table and instructions for the TC74HC132AF, a dual CMOS quad 2-input NAND gates with Schmitt-trigger action.

TC74HC132AF Parameter Table

Parameter Symbol Min Typ Max Unit Conditions
Supply Voltage VCC 2.0 - 6.0 V
Input Low Voltage VIL 0.3 - 0.8 V VCC = 4.5V
Input High Voltage VIH 2.0 - 3.5 V VCC = 4.5V
Output Low Voltage VOL 0.0 0.1 0.2 V IOL = 4 mA
Output High Voltage VOH 4.3 4.5 4.8 V IOH = -0.4 mA
Input Leakage Current IIL -1 - 1 μA VCC = 4.5V
Output Sink Current IOL -8 - -4 mA VCC = 4.5V, VO = 0V
Output Source Current IOH 0.4 - 0.8 mA VCC = 4.5V, VO = VCC - 0.4V
Propagation Delay Time (Low to High) tPLH - 9 22 ns VCC = 4.5V, IL = 4 mA, IH = -0.4 mA
Propagation Delay Time (High to Low) tPHL - 9 22 ns VCC = 4.5V, IL = 4 mA, IH = -0.4 mA
Power Dissipation PD - - 100 mW Maximum per package
Operating Temperature Range TA -40 - 85 °C Industrial Grade
Storage Temperature Range TSTG -65 - 150 °C

Instructions for Using TC74HC132AF

  1. Power Supply:

    • Ensure the supply voltage (VCC) is within the range of 2.0V to 6.0V.
    • Connect the ground (GND) pin to the system ground.

  2. Input Signals:

    • Apply input signals to the appropriate input pins (A1, B1, A2, B2, etc.).
    • The input low voltage (VIL) should be between 0.3V and 0.8V for VCC = 4.5V.
    • The input high voltage (VIH) should be between 2.0V and 3.5V for VCC = 4.5V.

  3. Output Signals:

    • The output low voltage (VOL) will be between 0.0V and 0.2V when sinking 4 mA.
    • The output high voltage (VOH) will be between 4.3V and 4.8V when sourcing -0.4 mA.

  4. Propagation Delay:

    • The propagation delay time from low to high (tPLH) and from high to low (tPHL) is typically 9 ns with a maximum of 22 ns at VCC = 4.5V.

  5. Temperature Considerations:

    • The device is designed to operate in an industrial temperature range of -40°C to 85°C.
    • Store the device in a temperature range of -65°C to 150°C.

  6. Handling:

    • Handle the device with care to avoid static damage.
    • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

  7. Mounting:

    • Mount the device on a PCB using standard surface mount technology (SMT) techniques.
    • Ensure proper thermal management if the device is expected to dissipate significant power.

  8. Testing:

    • Test the device under the specified operating conditions to ensure it meets the performance specifications.
    • Use a logic analyzer or oscilloscope to verify the correct operation of the outputs.

By following these instructions, you can ensure reliable and efficient operation of the TC74HC132AF in your circuit design.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag