Description
BUY SN74HC107N https://www.utsource.net/itm/p/1701112.html
Octal D-Type Flip-Flop with 3-State Outputs; Package: TSSOP 20 LEAD; No of Pins: 20; Container: Tape and Reel; Qty per Container: 2500
| Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
| Supply Voltage |
VCC |
2.0 |
- |
6.0 |
V |
| Input Low Voltage |
VIL |
-0.5 |
- |
1.5 |
V |
| Input High Voltage |
VIH |
3.5 |
- |
VCC+0.5 |
V |
| Output Low Voltage |
VOL |
-0.5 |
- |
0.4 |
V |
| Output High Voltage |
VOH |
2.4 |
- |
VCC |
V |
| Input Current (Low) |
IIL |
-1.0 |
- |
-0.02 |
mA |
| Input Current (High) |
I<subIH |
0.02 |
- |
0.1 |
mA |
| Output Current (Low) |
IOL |
-25 |
- |
-4.0 |
mA |
| Output Current (High) |
IOH |
-4.0 |
- |
25 |
mA |
| Propagation Delay Time (Typ) |
tpd |
- |
12 |
- |
ns |
| Power Dissipation |
PD |
- |
- |
100 |
mW |
| Operating Temperature Range |
TA |
-40 |
- |
85 |
°C |
Instructions for Using SN74HC107N
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0V to 6.0V.
- Connect VCC to the positive power supply and GND to the ground.
Input Signals:
- Apply input signals (CLK, D, CLR, PR) with voltages within the specified ranges:
- Low: VIL ≤ 1.5V
- High: VIH ≥ 3.5V (up to VCC+0.5V)
Output Signals:
- The output signals (Q, Q?) will be:
- Low: VOL ≤ 0.4V
- High: VOH ≥ 2.4V (up to VCC)
Current Limits:
- Ensure that the input currents do not exceed:
- IIL: -1.0mA to -0.02mA
- IIH: 0.02mA to 0.1mA
- Ensure that the output currents do not exceed:
- IOL: -25mA to -4.0mA
- IOH: -4.0mA to 25mA
Propagation Delay:
- The typical propagation delay time (tpd) is 12ns. This is the time it takes for the output to respond to a change in the input signal.
Temperature Range:
- Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.
Power Dissipation:
- The maximum power dissipation (PD) is 100mW. Ensure proper heat dissipation if operating near this limit.
Handling:
- Handle the device with care to avoid static damage. Use appropriate ESD protection measures.
Testing:
- Before integrating the SN74HC107N into your circuit, test it using a simple setup to verify its functionality.
Storage:
- Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
(For reference only)
More detail about Utsource Holding Company Limited
