SN74LS113AN: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY SN74LS113AN https://www.utsource.net/itm/p/1887199.html
DUAL J-K NEGATIVE-EDGE-TRIGGERED FLIP-FLOPS WITH PRESET

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	V_CC	Operating	4.75	-	5.25	V
Input High Voltage	V_IH	I_IN = -0.5 mA	2.0	-	-	V
Input Low Voltage	V_IL	I_IN = 0.5 mA	-	-	0.8	V
Output High Voltage	V_OH	I_OL = -0.4 mA	2.4	-	-	V
Output Low Voltage	V_OL	I_OL = 16 mA	-	-	0.5	V
Propagation Delay Time	t_pd	V_CC = 5V	-	22	34	ns
Power Dissipation	P_D	Per Package	-	-	500	mW
Operating Temperature Range	T_A	Commercial	0	-	70	°C
Storage Temperature Range	T_STG		-65	-	150	°C

Power Supply:
- Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
- Connect the ground (GND) pin to a stable 0V reference.
Input Signals:
- For a valid high input (V_IH), the voltage should be at least 2.0V.
- For a valid low input (V_IL), the voltage should not exceed 0.8V.
- Avoid floating inputs; use pull-up or pull-down resistors as necessary.
Output Signals:
- The output high voltage (V_OH) should be at least 2.4V when sourcing current up to -0.4 mA.
- The output low voltage (V_OL) should not exceed 0.5V when sinking current up to 16 mA.
Propagation Delay:
- The typical propagation delay time (t_pd) is 22 ns with a maximum of 34 ns at V_CC = 5V.
Power Dissipation:
- Ensure that the total power dissipation (P_D) does not exceed 500 mW to avoid overheating.
Temperature:
- Operate the device within the commercial temperature range of 0°C to 70°C.
- Store the device within the storage temperature range of -65°C to 150°C.
Handling:
- Handle the device with care to avoid electrostatic discharge (ESD) damage.
- Follow standard ESD protection procedures during handling and assembly.
Mounting:
- Ensure proper mechanical mounting to maintain electrical performance and thermal management.
- Use appropriate soldering techniques and temperatures to avoid damage to the device.

(For reference only)