SN74HC14APWR

BUY SN74HC14APWR https://www.utsource.net/itm/p/5171123.html

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 6.0V.
   • Avoid connecting the device to voltages outside this range to prevent damage.

2. Input Signals:

   • For a logic low input, the voltage should be less than or equal to 1.5V.
   • For a logic high input, the voltage should be greater than or equal to 3.5V.
   • Ensure input signals do not exceed the supply voltage (V_CC).

3. Output Signals:

   • The output will be low (V_OL) when the input is high, with a typical voltage of 0.1V and a maximum of 0.4V.
   • The output will be high (V_OH) when the input is low, with a minimum voltage of 2.4V.

4. Current Ratings:

   • The device can sink up to 25mA and source up to -5mA per output.
   • Ensure that the load connected to the outputs does not exceed these current ratings.

5. Propagation Delay:

   • The propagation delay time (t_pd) is typically 8ns under standard conditions (V_CC = 4.5V to 5.5V, T_A = 25°C).
   • This value can vary between 8ns and 22ns depending on the specific operating conditions.

6. Temperature Range:

   • The device is designed to operate within a temperature range of -40°C to 85°C.
   • Store the device in a temperature range of -65°C to 150°C.

7. Power Dissipation:

   • The maximum power dissipation per package is 100mW.
   • Ensure proper heat dissipation if the device is expected to operate near its maximum power rating.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD protection measures during handling and installation.