SN74HC4051N: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	V_CC	2.0	-	6.0	V	Operating supply voltage
Input Voltage	V_I	-0.5	-	V_CC + 0.5	V	Input voltage range
Output Voltage	V_O	-0.5	-	V_CC + 0.5	V	Output voltage range
Control Voltage	V_CC	2.0	-	6.0	V	Control input voltage range
Leakage Current	I_LK	-	1.0	-	μA	Leakage current at each channel
On-State Resistance	R_ON	-	50	-	Ω	Typical on-state resistance
Off-State Leakage Current	I_OFF	-	1.0	-	μA	Leakage current when channel is off
Power Dissipation	P_D	-	-	350	mW	Maximum power dissipation per package
Operating Temperature	T_A	-40	-	85	°C	Operating temperature range
Storage Temperature	T_STG	-65	-	150	°C	Storage temperature range

Power Supply:
- Ensure the supply voltage (V_CC) is within the specified range (2.0V to 6.0V).
- Connect the ground (GND) pin to the common ground.
Channel Selection:
- Use the S0, S1, and S2 pins to select one of the eight channels.
- The binary values of S0, S1, and S2 determine the selected channel:
  - S0 = 0, S1 = 0, S2 = 0: Channel 0
  - S0 = 1, S1 = 0, S2 = 0: Channel 1
  - S0 = 0, S1 = 1, S2 = 0: Channel 2
  - S0 = 1, S1 = 1, S2 = 0: Channel 3
  - S0 = 0, S1 = 0, S2 = 1: Channel 4
  - S0 = 1, S1 = 0, S2 = 1: Channel 5
  - S0 = 0, S1 = 1, S2 = 1: Channel 6
  - S0 = 1, S1 = 1, S2 = 1: Channel 7
Inhibit Pin (INH):
- When INH is high, all channels are turned off.
- When INH is low, the selected channel is active.
Signal Handling:
- Ensure that the input and output signals (V_I and V_O) are within the valid voltage range (-0.5V to V_CC + 0.5V).
- Be aware of the leakage currents (I_LK and I_OFF) which can affect signal integrity.
Thermal Considerations:
- Monitor the power dissipation (P_D) to ensure it does not exceed 350mW.
- Operate the device within the specified temperature range (T_A: -40°C to 85°C).
Storage:
- Store the device in a dry environment within the storage temperature range (T_STG: -65°C to 150°C).
Handling:
- Handle the device with care to avoid damage from electrostatic discharge (ESD). Use proper ESD protection practices.

By following these parameters and instructions, you can ensure reliable operation of the SN74HC4051N multiplexer/demultiplexer.

(For reference only)