BCM1125HB0K800G: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	VIN	3.0	-	5.5	V
Output Voltage	VOUT	-	3.3	-	V
Output Current (Max)	IOUT	-	1.2	1.5	A
Quiescent Current	IQ	-	50	-	μA
Efficiency (Typical)	η	-	90	-	%
Dropout Voltage	VDROPOUT	-	200	-	mV
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C
Thermal Resistance (θJA)	-	-	40	-	°C/W

Power Supply:
- Ensure the input voltage is within the specified range of 3.0V to 5.5V.
- Use a stable power source to avoid fluctuations that could affect performance.
Output Configuration:
- The output voltage is fixed at 3.3V. No external resistors are required for voltage setting.
- Ensure the load current does not exceed the maximum output current of 1.5A.
Thermal Management:
- Place the component on a PCB with adequate copper area to help dissipate heat.
- If operating near the maximum temperature, consider adding a heatsink or improving airflow.
Capacitors:
- Use input and output capacitors as recommended by the datasheet to ensure stability and reduce ripple.
- Typical values are 10μF for input and 10μF for output capacitors.
Layout Considerations:
- Keep the traces between the input capacitor and the BCM1125HB0K800G short to minimize inductance.
- Avoid placing high-frequency noise sources close to the component to prevent interference.
Storage and Handling:
- Store the component in a dry environment to prevent moisture damage.
- Handle with care to avoid static discharge, which can damage the component.
Testing:
- Before finalizing the design, test the component under various operating conditions to ensure it meets the required specifications.
- Verify the output voltage and current using a multimeter and oscilloscope.
Compliance:
- Ensure the design complies with relevant safety and regulatory standards for the intended application.

(For reference only)