Elec-component
CNY17F-3X006
CNY17F-3X006

 

CNY17F-3X006

Utsource Holding Company Limited flag
Category: Elec-component Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY CNY17F-3X006 https://www.utsource.net/itm/p/12596251.html

Parameter Symbol Min Typ Max Unit Description
Forward Current IF - 60 - mA Maximum forward current
Reverse Voltage VR - 5 - V Maximum reverse voltage
Emitter-Collector VEC - 0.2 - V Saturation voltage
Collector Current IC - 50 - mA Maximum collector current
CTR (Current Transfer Ratio) CTR 100 300 600 % Typical current transfer ratio
Response Time (Rising) Tr - 10 - μs Response time, rising edge
Response Time (Falling) Tf - 8 - μs Response time, falling edge
Operating Temperature Topr -40 - 85 °C Operating temperature range
Storage Temperature Tstg -40 - 100 °C Storage temperature range

Instructions for Use:

  1. Mounting: Ensure the component is mounted on a suitable PCB with adequate spacing to prevent overheating.
  2. Polarity Check: Verify correct polarity before soldering; incorrect polarity can lead to device failure.
  3. Current Limiting: Use appropriate resistors to limit the forward current to within the specified limits.
  4. Heat Dissipation: For applications where the device will be subjected to high currents or temperatures, ensure proper heat dissipation.
  5. Environmental Considerations: Avoid exposing the device to environments outside its operating and storage temperature ranges.
  6. Electrostatic Sensitivity: Handle with care to avoid damage from electrostatic discharge.
  7. Testing: Test the device in-circuit to confirm functionality after installation.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag