LT2078IS8#PBF: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vsupply	Operating	2.85		5.5	V
Output Voltage Range	Vout	Adjustable				V
Quiescent Current	IQ	Vsupply = 3V, no load		1.9		μA
Dropout Voltage	Vdropout	Iout = 10mA, Vsupply = 3V		240		mV
Load Regulation		Iout = 1mA to 15mA		0.01		%
Line Regulation		Vsupply = 2.7V to 5.5V		0.01		%
Power Supply Rejection Ratio	PSRR	f = 120Hz, Vsupply = 3V		75		dB
Temperature Stability		Over temperature range		±50		ppm/°C

Supply Voltage Connection:
- Connect the supply voltage (Vsupply) between the IN pin and GND. Ensure the supply voltage is within the operating range of 2.85V to 5.5V.
Output Configuration:
- For adjustable output voltage, connect an external resistor network between the ADJ pin, OUT pin, and GND. Refer to the datasheet for specific resistor values based on desired output voltage.
Bypass Capacitors:
- Place a 1μF capacitor between the IN pin and GND close to the device for stability.
- Optionally, place a 1μF capacitor between the OUT pin and GND to improve transient response.
Thermal Considerations:
- Ensure adequate heat dissipation if operating at higher currents or in high ambient temperatures.
Operating Temperature:
- The device is designed to operate over a temperature range from -40°C to +125°C.
Handling Precautions:
- Handle with care to avoid damage to pins and ensure proper insertion into the circuit board.

For detailed design considerations and further specifications, refer to the full datasheet provided by the manufacturer.

(For reference only)