Description
BUY 119-11340J https://www.utsource.net/itm/p/11896410.html
| Parameter |
Value |
| Product Code |
119-11340J |
| Description |
Relay, SPDT |
| Coil Voltage |
24V DC |
| Coil Resistance |
750 Ohms |
| Contact Form |
SPDT |
| Contact Rating |
10A |
| Insulation Voltage |
600V AC |
| Operating Temp Range |
-40°C to 85°C |
| Storage Temp Range |
-40°C to 85°C |
Instructions:
Installation:
- Ensure the relay is installed in a location that meets the operating temperature range.
- Connect the coil terminals to the appropriate control voltage (24V DC).
Wiring:
- Wire the common (COM) terminal of the relay to your load or circuit.
- Connect the normally open (NO) and normally closed (NC) terminals as required by your application.
Operation:
- When the coil is energized, the contacts will switch from the NC to the NO position.
- Ensure not to exceed the contact rating of 10A to prevent damage to the relay.
Maintenance:
- Periodically inspect connections for tightness and corrosion.
- Replace the relay if any signs of malfunction or physical damage are observed.
(For reference only)
More detail about Utsource Holding Company Limited
