TCA0372DM2ELG: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Max	Unit
Supply Voltage	VDD		1.65	3.6	V
Output Low Voltage	VOL	IO = 8 mA, VDD = 3.3V	0.1		V
Output High Voltage	VOH	IO = -2 mA, VDD = 3.3V		3.2	V
Input Leakage Current	IIL	VCC = 3.3V	-1	1	μA
Propagation Delay Time	tpd	VDD = 3.3V, TA = 25°C	5	7	ns
Power Dissipation	PD	All outputs high		90	mW

Power Supply:
- Ensure the supply voltage (VDD) is within the range of 1.65V to 3.6V.
Output Configuration:
- When configuring output states, note that the output low voltage (VOL) should not exceed 0.1V when sourcing 8mA.
- For output high voltage (VOH), ensure it remains below 3.2V when sinking -2mA.
Input Handling:
- Be aware of the input leakage current (IIL), which can be between -1μA and 1μA at a supply voltage of 3.3V.
Timing Considerations:
- Account for the propagation delay time (tpd) of 5 to 7 nanoseconds under typical operating conditions.
Power Management:
- Monitor power dissipation; it should not exceed 90mW when all outputs are in a high state.
Operating Temperature:
- The device is typically rated for operation over a temperature range specified by the manufacturer, usually from -40°C to +85°C unless otherwise noted.
Handling and Storage:
- Follow standard ESD precautions to avoid damage during handling.
- Store in recommended conditions to prevent moisture-related issues.
Application Notes:
- Refer to the datasheet for detailed application circuits and recommendations specific to your use case.

(For reference only)