Description
BUY MOC3082M https://www.utsource.net/itm/p/11545399.html
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Input Forward Voltage |
VIF |
IF=10mA |
|
1.2 |
1.5 |
V |
| Input Peak Reverse Voltage |
VIRM |
|
|
|
5 |
V |
| Input Current |
IF |
TA=25°C |
15 |
30 |
50 |
mA |
| Isolation Voltage |
VIORM |
1min, 50/60Hz |
|
|
4000 |
Vrms |
| Zero Cross Range |
VZC |
|
-50 |
|
+50 |
V |
| Output Turn-On Time |
tr |
IT=1A |
|
8 |
12 |
μs |
| Output Turn-Off Time |
tf |
IT=1A |
|
8 |
12 |
μs |
| Repetitive Peak Off-State Voltage |
VDRM |
TJ=25°C |
|
|
600 |
V |
| RMS On-State Current |
IT(RMS) |
TC=70°C, 1 cycle |
|
|
100 |
mA |
Instructions for MOC3082M:
Mounting and Handling:
- Handle the device carefully to avoid damage.
- Ensure proper mounting on a PCB with adequate clearance.
Input Circuit:
- Connect the input side (pins 1 and 2) to your control circuit ensuring the current does not exceed the maximum specified.
- Use appropriate resistors to limit the current through the LED.
Output Circuit:
- Connect the output side (pins 4 and 6) to the load you wish to control.
- Ensure that the load voltage does not exceed the repetitive peak off-state voltage.
Zero Cross Detection:
- The MOC3082M includes zero-cross detection which helps in reducing EMI by switching at zero crossing points of the AC waveform.
Isolation:
- The device provides electrical isolation between input and output circuits up to 4000Vrms for 1 minute.
Operating Temperature:
- Ensure that the operating temperature is within the specified range to prevent overheating and potential failure.
Safety Precautions:
- Always use appropriate safety measures when handling high voltages.
- Ensure the device is properly insulated and installed according to local electrical codes and standards.
(For reference only)
More detail about Utsource Holding Company Limited
