Description
BUY PC3H3DJ0000F https://www.utsource.net/itm/p/9524079.html
| Parameter |
Description |
| Part Number |
PC3H3DJ0000F |
| Type |
DDR3 SDRAM |
| Capacity |
4 GB |
| Module Type |
DIMM |
| Memory Speed |
1600 MT/s (PC3-12800) |
| Voltage |
1.5V |
| CAS Latency (CL) |
CL11 |
| RAS# to CAS# Delay |
TRCD 11 |
| Row Precharge Time |
TRP 11 |
| Row Active Time |
TRAS 33 |
| Cycle Time |
TCKE 10 |
| Rank |
Single Rank |
| ECC |
Non-ECC |
| Operating Temperature |
0°C to 85°C |
| RoHS Compliance |
Yes |
Instructions for Use
- Installation: Ensure the system is powered off before installing the module. Align the notch on the module with the slot on the motherboard and press down firmly until the clips on both sides snap into place.
- Compatibility Check: Verify that your motherboard supports DDR3 memory modules and specifically the speed and voltage requirements of this module.
- BIOS Settings: After installation, enter the BIOS setup during boot-up to ensure the system recognizes the new memory and adjusts settings as necessary (e.g., XMP profiles for optimized performance).
- Cooling Considerations: Ensure adequate airflow around the memory slots to prevent overheating, especially in high-performance systems.
- Warranty: Refer to the manufacturer’s warranty policy for any issues or defects found after installation.
For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.
(For reference only)
More detail about Utsource Holding Company Limited
