HCPL-072L-500E: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	V_F	IF = 20 mA		1.2	1.6	V
Reverse Voltage	V_R				5	V
Peak Reverse Current	I_RM	t = 1 s			5	mA
Power Dissipation	P_D	Ta = 25°C			150	mW
Operating Temperature	T_op		-40		85	°C
Storage Temperature	T_stg		-40		125	°C
Rise Time	t_r	RL = 500 Ω, C_L = 10 pF			20	ns
Fall Time	t_f	RL = 500 Ω, C_L = 10 pF			20	ns
Propagation Delay	tPLH/tPHL	RL = 500 Ω, C_L = 10 pF		10		ns
Common Mode Transient	dVCM/dt	CMR = 10 kV/μs				V/μs

Handling and Installation:
- Handle the HCPL-072L-500E with care to avoid damage to the leads or body.
- Ensure that the device is soldered into the PCB at a temperature not exceeding the specified storage temperature.
Operating Environment:
- Operate the device within the specified operating temperature range (-40°C to 85°C) to ensure reliable performance.
- Store the device in an environment where the temperature does not exceed the storage temperature limit (-40°C to 125°C).
Electrical Characteristics:
- Do not exceed the maximum forward voltage (1.6V) when applying current to the LED.
- Ensure that any reverse voltage applied does not exceed 5V to prevent damage.
Timing Parameters:
- The rise time and fall time should be considered when designing circuits to ensure compatibility with timing requirements.
- Propagation delay must be accounted for in high-speed applications to maintain signal integrity.
Power Management:
- Keep power dissipation below 150 mW to prevent overheating and potential failure of the device.
Testing:
- Use the specified conditions for testing parameters such as rise time, fall time, and propagation delay to ensure accurate results.

(For reference only)