SN74HC125A: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		2.0		6.0	V
Output High Level Voltage	VOH	IO = -1mA		2.4	Vcc-0.3	V
Output Low Level Voltage	VOL	IO = 16mA		0.1	0.4	V
Input Low Level Voltage	VIL				0.8	V
Input High Level Voltage	VIH		2.0			V
Propagation Delay Time	tp	Vcc=4.5V, tPLH=tPHL		10		ns
Power Dissipation	PD	Per Package			500	mW
Operating Temperature	Topr		-40		85	°C

Supply Voltage (Vcc):
- Ensure the supply voltage is within the range of 2.0V to 6.0V. Voltages outside this range can damage the device.
Output Levels:
- For output high level (VOH), ensure the load current (IO) does not exceed -1mA to maintain the specified voltage levels.
- For output low level (VOL), ensure the load current (IO) does not exceed 16mA to maintain the specified voltage levels.
Input Levels:
- The input low level (VIL) should not exceed 0.8V.
- The input high level (VIH) should be at least 2.0V.
Propagation Delay Time (tp):
- Measured under conditions where Vcc is 4.5V, and both propagation delay times from low to high (tPLH) and from high to low (tPHL) are considered. Typical value is 10ns.
Power Dissipation (PD):
- The maximum power dissipation per package is 500mW. Ensure adequate heat dissipation if operating near this limit.
Operating Temperature (Topr):
- Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
Handling Precautions:
- Handle with care to avoid static damage. Use proper ESD protection measures when handling the component.
- Ensure all connections are secure and correct to prevent malfunction or damage.
Application Notes:
- Refer to the manufacturer’s application notes for detailed guidelines on using the SN74HC125A in various circuit configurations.

(For reference only)