SN74LS46N: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		4.75		5.25	V
Output High Voltage	VOH	IOL = -0.4 mA	2.4	2.7		V
Output Low Voltage	VOL	IOH = 16 mA			0.5	V
Input Low Voltage	VIL				0.8	V
Input High Voltage	VIH		2.0			V
Propagation Delay Time	tpd	VCC = 5V, TA = 25°C		34		ns
Power Dissipation	PD				100	mW

Power Supply Connection:
- Connect the supply voltage (Vcc) to pin 14 and ground (GND) to pin 7.
- Ensure the supply voltage is within the specified range of 4.75V to 5.25V.
Input Signals:
- Apply input signals within the valid input voltage levels (VIL and VIH).
- Ensure that the input voltages do not exceed the supply voltage or go below ground level.
Output Signals:
- The output signals will be driven high or low based on the logic operation performed by the SN74LS46N.
- Ensure that the load connected to the output does not exceed the maximum current ratings to prevent damage.
Propagation Delay:
- Consider the propagation delay time in your circuit design to ensure proper timing and synchronization.
Handling Precautions:
- This device is sensitive to electrostatic discharge (ESD). Handle with appropriate ESD precautions.
- Avoid exceeding the maximum power dissipation to prevent overheating.
Operating Temperature Range:
- The device is designed to operate within a temperature range of -55°C to +125°C. Ensure that the operating environment does not exceed these limits.
Storage and Handling:
- Store in a dry, cool place away from direct sunlight and sources of heat.
- Follow anti-static handling procedures when installing or removing the component from circuits.

(For reference only)