TLP521-1GB(GB,F): Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 5 mA		1.2	1.6	V
Reverse Breakdown Voltage	VBR	IR = 1 mA	5		7	V
Forward Current	IF				50	mA
Output Collector-Emitter Saturation Voltage	VCE(sat)	IC = 5 mA, IF = 5 mA		0.4	0.5	V
Output Collector Leakage Current	ICEO	VR = 30 V, TA = 25°C			100	nA
Propagation Delay Time	tppl	VIN = 5 V, VOUT = 1.4 V, RL = 510 Ω		8	12	μs
Rise Time	tr	VIN = 5 V, VOUT = 1.4 V, RL = 510 Ω		1	3	μs
Fall Time	tf	VIN = 5 V, VOUT = 1.4 V, RL = 510 Ω		1	3	μs

Mounting and Handling:
- Handle the TLP521-1GB with care to avoid damage.
- Ensure proper mounting on a PCB with appropriate soldering techniques.
Power Supply:
- The device operates under standard power supply conditions but ensure not to exceed the maximum ratings listed.
Input Circuit:
- Connect the input LED in series with a current-limiting resistor to maintain the forward current (IF) within the specified limits.
Output Circuit:
- Connect the output transistor collector to the positive supply through a load resistor.
- Ensure that the load current does not exceed the maximum allowable collector current (IC).
Signal Integrity:
- Keep signal traces short to minimize noise and interference.
- Place decoupling capacitors close to the power pins if necessary.
Environmental Considerations:
- Operate the device within the recommended temperature range to ensure reliable performance.
- Protect against moisture and corrosive environments.
Testing:
- Before final assembly, test the device using the specified test conditions to verify correct operation.
Storage:
- Store in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)