TLP532BL: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 5 mA		1.2	1.6	V
Reverse Breakdown Voltage	VR	IR = 5 μA		5		V
Forward Current	IF	TF = 25°C		50		mA
Output Leakage Current	IOL	VOUT = 30 V, TOP = 25°C		1		μA
Isolation Voltage	VIORM	1 min, 50/60 Hz		2500		Vrms
Propagation Delay Time	tPLH	VIN = 5 V, VOUT = 5 V	1	2	3	μs
Storage Temperature	Tstg		-40		85	°C

Mounting and Handling:
- Handle the device with care to avoid damage to the leads.
- Ensure proper alignment during mounting to prevent mechanical stress.
Electrical Connections:
- Connect the input side (LED) to a suitable current-limiting resistor to ensure the forward current does not exceed the maximum rating.
- Connect the output side (phototransistor) to the load and ensure that the voltage across the phototransistor does not exceed the reverse breakdown voltage.
Operating Environment:
- Operate within the specified storage temperature range to ensure reliable performance.
- Avoid exposing the device to environments with high humidity or corrosive gases.
Safety Considerations:
- Ensure isolation requirements are met when using the device in applications where electrical safety is critical.
- Follow all relevant safety standards and guidelines for handling optocouplers.
Testing and Troubleshooting:
- Use appropriate test equipment to verify the device parameters such as forward voltage and propagation delay time.
- Check for proper operation by measuring the output leakage current under no-input conditions.

(For reference only)