Description
BUY 74HC03AP https://www.utsource.net/itm/p/1528575.html
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
VCC |
|
2.0 |
|
6.0 |
V |
| Input Low Voltage |
VIL |
|
0 |
|
1.5 |
V |
| Input High Voltage |
VIH |
|
3.5 |
|
VCC |
V |
| Output Low Voltage |
VOL |
IOL = 4 mA |
0 |
|
0.1 |
V |
| Output High Voltage |
VOH |
IOH = -4 mA |
|
|
VCC-0.1 |
V |
| Input Leakage Current |
IIL |
|
-1 |
|
1 |
μA |
| Output Leakage Current |
IOL |
|
-4 |
|
4 |
mA |
| Propagation Delay Time |
tpd |
VCC = 4.5V, TA = 25°C |
|
9 |
|
ns |
| Power Consumption |
ICC |
|
|
1 |
|
μA |
Instructions for Use:
- Power Supply: Ensure the supply voltage (VCC) is within the range of 2.0V to 6.0V.
- Input Signals: Apply input signals that comply with the specified input low (VIL) and high (VIH) voltages.
- Output Load: Connect loads that do not exceed the maximum output current limits to avoid damage.
- Operating Temperature: The device is designed to operate within a temperature range suitable for commercial applications, typically -40°C to +85°C.
- Propagation Delay: Account for the propagation delay time in timing-sensitive applications.
- Power Dissipation: Be mindful of power consumption; ensure adequate heat dissipation if operating near maximum power levels.
- Handling Precautions: Handle the IC carefully to prevent electrostatic discharge (ESD) damage. Use appropriate ESD protection measures.
This table and set of instructions provide essential information for effectively using the 74HC03AP quad 2-input NAND gates with open-drain outputs.
(For reference only)
More detail about Utsource Holding Company Limited
