74HC4094AP

BUY 74HC4094AP https://www.utsource.net/itm/p/1271148.html

Instructions for 74HC4094AP

1. Power Supply Connection:

   • Connect VCC (pin 16) to the positive supply voltage within the range of 2.0V to 6.0V.
   • Connect GND (pin 8) to the common ground.

2. Signal Input Connections:

   • Connect the serial data input (DS) to your microcontroller or another data source.
   • Connect the shift register clock (SH_CP) and storage register clock (ST_CP) to appropriate control lines from your microcontroller.

3. Output Configuration:

   • The 74HC4094AP provides 8 serial-in/parallel-out flip-flops with output latches. Ensure that the outputs (Q0-Q7) are connected to the desired devices or circuits.
   • Outputs can source or sink up to 35mA each but should be limited based on total power dissipation considerations.

4. Data Loading and Latching:

   • Data is shifted into the device on the rising edge of SH_CP.
   • After all data bits are loaded, a high pulse on ST_CP will transfer the data from the shift register to the storage register, making it available at the output pins.

5. Propagation Delay Consideration:

   • Be aware of the propagation delay time when designing timing diagrams for your circuit. This ensures accurate data transfer between stages.

6. Temperature Range:

   • Ensure the operating temperature remains within -40°C to 85°C to maintain reliable operation.

7. Storage Precautions:

   • Store the device in an environment where the temperature does not exceed -65°C to 150°C to prevent damage.

8. Handling Electrostatic Discharge (ESD):

   • Handle with care to avoid ESD damage; use proper anti-static measures during installation and handling.