MBR60035CTL: Top Choice in United States (USA) Utsource Holding Company Limited

Description

BUY MBR60035CTL https://www.utsource.net/itm/p/3415.html
SCHOTTKY DIODES MODULE TYPE 600A

Parameter	Symbol	Value	Unit	Conditions/Notes
Maximum Repetitive Peak Reverse Voltage	VRRM	600	V	Repetitive peak reverse voltage
Maximum RMS Voltage	VRMS	424	V	RMS voltage
Maximum Average Rectified Output Current (at T_A = +75°C)	Io	35	A	Continuous wave
Maximum Average Rectified Output Current (at T_A = +85°C)	Io	31.5	A	Continuous wave
Maximum Non-repetitive Peak Surge Current	IFSM	300	A	t = 10ms, IFSM = 2 x Io
Junction Temperature Range	TJ	-55 to +175	°C	Operating temperature range
Storage Temperature Range	TSTG	-55 to +175	°C	Storage temperature range
Total Device Dissipation	Ptot	250	W	TC = +75°C

Installation and Handling:
- Handle the MBR60035CTL with care to avoid damage to the leads and body.
- Ensure proper heat sinking if operating near maximum current and temperature limits.
Electrical Connections:
- Connect the rectifier in circuits where a high surge current capability is required.
- Ensure correct polarity when installing; connect the anode to the higher potential and the cathode to the lower potential.
Thermal Management:
- For applications requiring operation at or near maximum average rectified output current, ensure adequate heat dissipation to maintain junction temperatures within specified limits.
Surge Current Considerations:
- The device can handle non-repetitive peak surge currents up to 300A for short durations (e.g., 10ms). Ensure that surge conditions do not exceed these limits to prevent damage.
Environmental Considerations:
- Operate and store the device within the specified temperature ranges to ensure reliable performance and longevity.
Safety Precautions:
- Follow all safety guidelines for handling high-voltage and high-current components.
- Ensure proper insulation and isolation in the circuit design to protect against electrical hazards.

(For reference only)