KBP307

BUY KBP307 https://www.utsource.net/itm/p/759569.html
Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers

Instructions for Use:

1. Input Connection:

   • Connect the input voltage (V_IN) to the input pin of the KBP307.
   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.

2. Output Connection:

   • Connect the output pin of the KBP307 to the load or circuit requiring a regulated 3.3V supply.
   • The maximum output current is 300mA.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the system.

4. Capacitors:

   • Place a 1μF ceramic capacitor between the input pin and ground to filter input noise.
   • Place a 1μF ceramic capacitor between the output pin and ground to stabilize the output voltage.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current, especially at higher ambient temperatures.
   • The device can operate up to 85°C, but performance may degrade at higher temperatures.

6. Storage:

   • Store the KBP307 in a dry environment within the temperature range of -65°C to 150°C.

7. Handling:

   • Handle with care to avoid static damage. Use appropriate ESD protection measures.

8. Testing:

   • Before finalizing the design, test the regulator under various load conditions to ensure stability and performance meet the requirements.