SFECV10.7MS2-A-TC: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Part Number	SFECV10.7MS2-A-TC	-
Type	Multilayer Ceramic Capacitor (MLCC)	-
Capacitance	Nominal capacitance	10.7 μF
Voltage Rating	Maximum DC voltage	6.3 V
Tolerance	Capacitance tolerance	±10%
Temperature Coefficient	Change in capacitance with temperature	X7R (-55°C to +125°C)
Operating Temperature	Range of temperatures for operation	-55°C to +125°C
Insulation Resistance	Minimum resistance at rated voltage	1000 MΩ
Dissipation Factor	Ratio of energy dissipated to energy stored	1.0% (at 1 kHz)
Mounting Style	Surface mount	-
Package/Case	Case size	1206 (3216 metric)
Lead Spacing	Distance between leads	4.4 mm
Height	Maximum height above PCB	1.9 mm
RoHS Compliance	Compliance with Restriction of Hazardous Substances Directive	Yes

Mounting:
- Ensure that the PCB pads are clean and free from contaminants.
- Place the capacitor on the PCB ensuring proper alignment with the pads.
- Solder the capacitor using a soldering iron or reflow oven. Follow the recommended soldering profile for surface mount components.
Soldering Profile:
- Preheat the PCB to 150°C for 60 seconds.
- Apply solder paste to the pads.
- Place the capacitor on the pads and reflow solder at a peak temperature of 230°C to 250°C for 3 to 5 seconds.
- Allow the PCB to cool naturally.
Handling:
- Handle the capacitor with care to avoid mechanical stress.
- Do not use excessive force when placing or removing the capacitor from the PCB.
Storage:
- Store the capacitors in a dry environment with a relative humidity of less than 60%.
- Avoid exposure to high temperatures and direct sunlight.
Testing:
- After assembly, test the circuit to ensure the capacitor is functioning correctly.
- Use a multimeter to check the capacitance and insulation resistance if necessary.
Environmental Considerations:
- Dispose of the capacitor according to local environmental regulations.
- Recycle the capacitor if possible.

(For reference only)